Quat and Chlorine PPM Calculator

Concentrate needed for a target quat or chlorine ppm, by product % active and gallons.

Your numbers
Your inputs

Concentrate needed

Enter your numbers above.

From percent active to parts per million, and why test strips matter

Parts per million is a way to describe how much active sanitizer is in a solution. A product listed at 10% active contains 100,000 ppm of active ingredient before dilution, since 1% equals 10,000 ppm. The math is simple: concentrate volume = target ppm x batch volume / (percent active x 10,000). For 3 gallons of a 10% quat at 200 ppm, that is about 7.7 fl oz. This calculator does that arithmetic and returns ounces and mL.

Targets come from product labels and from food safety rules. For quats, the FDA Food Code requires the concentration on the manufacturer's label, a solution of at least 75 F, and water no harder than the label allows, so there is no single Food Code ppm to copy. For chlorine, the Food Code sets minimums that depend on temperature and pH: 25 to 49 mg/L needs at least 120 F, 50 to 99 mg/L needs 75 to 100 F depending on pH, and 100 mg/L or more needs at least 55 F. A Clorox bleach label uses 200 ppm for food-contact surfaces. Because these are label and regulatory values, treat a calculator's result as a starting mix and verify it.

Verify with test strips made for the sanitizer you use. Quat strips and chlorine strips are not interchangeable, and a strip must match your target range. Dip a strip in the mixed solution, compare to the color chart within the time stated, and adjust by adding concentrate or water. Restaurants use strips because a solution that is too weak may not sanitize, while one that is too strong can leave residue and should be rinsed or diluted according to the label.

Never mix quat and chlorine sanitizers in the same bucket, and never mix either with other cleaners. Chlorine solutions lose strength as they sit, so mix a fresh batch each shift or day. Wear gloves, and do not use a sanitizer on food-contact surfaces unless the label lists that use. For skin or eye contact, rinse with water and call Poison Help at 1-800-222-1222.

Where these numbers come from

The formulas and default values in this calculator are based on:

  • FDA Food Code section 4-501.114 (chemical sanitizer temperature, pH, concentration and hardness), as reproduced in the Delaware Administrative Code
  • Ultra Clorox Brand 6.15% Bleach EPA-registered label (200 ppm)
  • America's Poison Centers. Note: quat ppm targets are set by each product's label, so confirm on your label

This is general household-cleaning guidance and planning math, not medical or professional advice. Product formulas change, so the label on your bottle always wins: follow its directions and warnings, test a hidden spot first, and never mix cleaning products. For a poisoning emergency call Poison Help at 1-800-222-1222 (US), or 911 if someone has trouble breathing.

Frequently asked questions

What ppm should quat sanitizer be?

There is no single number. The FDA Food Code says to use the quat concentration on the manufacturer's label, so each product has its own ppm range and contact time. Use the ppm printed on your label and confirm with quat test strips.

How many ppm is chlorine sanitizer for food surfaces?

It depends on the label and local rules. The FDA Food Code ties the minimum chlorine strength to water temperature and pH, from 25 to 100 mg/L, and a Clorox bleach label uses 200 ppm on food-contact surfaces, so follow your label and health department's guidance.

How do I convert percent active to ppm?

Multiply the percent by 10,000. A 5% active product is 50,000 ppm, and a 10% product is 100,000 ppm. Then dilute by the ratio needed to reach your target.

All Cleaner Calcs tools